基于背压和最佳阀位控制的滑压曲线实时优化及应用

针对目前凝汽器背压对滑压值的修正无普适算式可供遵循的问题，通过作图法推理获得了滑压设定值与凝汽器背压及机组负荷之间的二元函数表达式；利用流量变工况计算方法解决最佳综合阀位的确定问题，在满足机组日常运行需求的条件下达到汽轮机高压调阀节流损失最小化；将提出的基于凝汽器背压和机组负荷的二元函数滑压实时优化和基于流量变工况计算的最佳综合阀位控制滑压实时优化方法相结合，将凝汽器背压对滑压值的修正作为粗调，将最佳综合阀位控制对滑压值的修正作为细调，共同实现对滑压设定值的实时调整。在某660 MW超临界机组上的应用表明，该方法能够节约供电煤耗约1.12 g/(kW·h）。     

Investigations on Emission Characteristics of a Liquid-Fueled Trapped Vortex Combustor

The combustion and emission formation process of liquid fuel in the trapped vortex combustor(TVC)are very complicated.A trapped vortex combustor with replaceable bluff-bodies was designed to investigate these processes.The bluff-body widths varied from 0.021 m to 0.036 m.Experimental tests were carried out.Liquid RP-3 aviation kerosene was used in the tests.Emissions were measured under atmospheric pressure.The combustion process was analyzed theoretically in the viewpoints of relative evaporation time,mixing time and reaction time.Numerical simulations were also conducted to help analyze the formation and depletion processes of pollutants in TVC.The results reveal that atomization was a critical factor for formation and depletion processes of pollutants.By controlling mixing speed of burned and unburned gases and thus fuel-air uniformity,turbulence intensity could also affect emission levels.In addition,residence time also affected the emissions by affecting combustion completeness and the time for NOx formation.All these factors were combined in a complicated way to affect combustion process and pollutant emissions.     

双馈风机风电场联络线出口故障方向判别

由于双馈风机风电场故障特性与传统同步机存在较大差别,因此传统方向元件应用于双馈风机风电场时存在适应性问题。针对双馈风机风电场存在的频率偏移、等值内阻抗不稳定和弱馈等特点,提出一种基于时域波形相似度的故障方向元件。根据推算的联络线对侧电压与保护安装处记忆电压波形的余弦相似度判断故障方向,能够有效解决双馈风机风电场出口故障方向判别存在的问题。在PSCAD/EMTDC中搭建典型的双馈风机接入系统,仿真结果表明,所提故障方向元件针对不同的故障类型均能有效判断故障方向。     

高质量浓度曲拉通X-100对煤泥浮选的抑制效应及机理

表面活性剂在煤泥浮选领域中应用广泛,且表面活性剂常被用于煤泥浮选促进剂,本文从另一个方面探究了表面活性剂在过量的情况下对煤泥浮选的抑制效应及其机理。以低灰煤粒和表面活性剂曲拉通X-100为研究对象,采用X射线光电子能谱(XPS)表征曲拉通X-100在煤表面的吸附状态,静态接触角测定仪测定曲拉通X-100对煤表面疏水性的影响,并探究了不同质量浓度曲拉通X-100液滴在煤粒表面的润湿与铺展情况,采用诱导时间测量仪分析不同质量浓度曲拉通X-100水溶液中的气泡与煤粒的黏附情况,最后通过紫外分光光度计定量表征浮选槽中残留曲拉通X-100质量浓度与不同浮选时间下浮选结果的对应关系。结果表明:高质量浓度曲拉通X-100会抑制煤粒上浮,随着浮选试验的进行,曲拉通X-100质量浓度逐渐降低,低质量浓度曲拉通X-100会促进煤粒被上浮气泡黏附而浮出;高质量浓度曲拉通X-100能够在煤粒表面发生有效吸附,该吸附属于物理吸附,且在一定程度上提高了煤表面的疏水性;高质量浓度曲拉通X-100水溶液更容易润湿煤表面,从而减缓了气泡-煤粒黏附过程中的液膜薄化与破裂速率;在高质量浓度曲拉通X-100水溶液中,气泡表面因罩盖有曲拉通X-100分子,导致气泡表面发生改性,难以与煤粒发生有效黏附。高质量浓度曲拉通X-100主要通过对气泡改性,以及减缓气泡与煤粒碰撞-黏附过程中的液膜薄化-破裂速率来抑制煤粒的浮选。     

Heat and mass transfer flow over a stretching surface with Ohmic heating and chemical reaction

The present study analyzes the effect of chemical reaction on an unsteady magnetohydrodynamic boundary layer viscous fluid over a stretching surface embedded in a porous medium with a uniform transverse magnetic field. A Darcy‐Forchheimer drag force model is employed to simulate the effect of second‐order porous resistance. Dissipative heat energy based on both viscous and Joule dissipation along with a heat source/sink is considered to enhance the energy equation. Similarity analysis is imposed to transform the governing differential equations into a set of nonlinear coupled ordinary differential equations. These sets of equations are solved numerically using the Runge‐Kutta fourth‐order scheme followed by the shooting algorithm. The effects of physical parameters such as magnetic field, Prandtl number, Eckert number, Schmidt number, unsteadiness parameter, and chemical reaction parameters have been discussed on velocity, temperature, and concentration fields. Computation for the coefficient of skin friction, rate of heat and mass transfer is done and presented in a table for validation of the present outcomes.     

富平银沟遗址青瓷标本的类型学分析

富平银沟遗址位于陕西省渭南市富平县华朱乡东北部银沟村。经过为期两年的考古调查与勘探,在该地区发现和搜集了大量的精美陶瓷产品。其中青瓷产品占比最大,具有很高的研究价值。本文主要通过选取银沟地区青瓷器形较为完整,并具有典型代表性的青瓷标本进行类型学的整理分析。根据器形,青瓷标本可分为碗、盘、盒、钵、香炉、瓶、罐、壶等。通过与耀州窑典型青瓷器的器形与纹饰对比,从器物的类型学解析银沟遗址青瓷器的烧造年代时期。     

Discrete‐time sector based hands‐off control for nonlinear system

This article presents a hands‐off control design for discrete‐time nonlinear system with a special type of nonlinear sector termed as “discrete‐time sector.” The design method to define the boundary of a discrete‐time sector is done with control‐Lyapunov function. The generalization of nonlinear system is viewed in the perspective of a comparison function. By means of a proposed sector, a switching control is designed such that no control action is experienced inside the sector thus, saving unnecessary control efforts. However, to study the robustness for discrete‐time system, a hands‐off control is modified to ensure the monotonic decrease in the energy of the system. Finally, the proposed approach is verified with the simulation results.     

Delay compensated control of the Stefan problem and robustness to delay mismatch

This paper presents a control design for the one‐phase Stefan problem under actuator delay via a backstepping method. The Stefan problem represents a liquid‐solid phase change phenomenon which describes the time evolution of a material's temperature profile and the interface position. The actuator delay is modeled by a first‐order hyperbolic partial differential equation (PDE), resulting in a cascaded transport‐diffusion PDE system defined on a time‐varying spatial domain described by an ordinary differential equation (ODE). Two nonlinear backstepping transformations are utilized for the control design. The setpoint restriction is given to guarantee a physical constraint on the proposed controller for the melting process. This constraint ensures the exponential convergence of the moving interface to a setpoint and the exponential stability of the temperature equilibrium profile and the delayed controller in the norm. Furthermore, robustness analysis with respect to the delay mismatch between the plant and the controller is studied, which provides analogous results to the exact compensation by restricting the control gain.     

7075铝合金热变形连接接头的组织与性能

应用Gleeble-3500热模拟机对7075铝合金进行了热变形连接试验,利用金相显微镜和扫描电镜对不同温度和保温时间的接头界面组织进行了观察和分析,并对接头进行了拉伸性能测试。结果表明:当连接温度为460 ℃,保温时间为24 h时,对界面进行EDS分析,界面处已经没有氧化物的偏聚,此时的力学性能最佳,抗拉强度达到444 MPa,屈服强度为265 MPa。